Hot sales Brickwork Reinforcement Mesh

Brickwork Reinforcement Mesh

The brickwork with Brick wall wire mesh is preferable to un-reinforced brickwork in all types of buildings. When embedded into the normal thickness of a brickwork-joint at every third joints, it forms an integral and whole structure, which is more strengthened against vibration, temperature change and tension stresses (especially on reclaimed ground). Expanded metal mesh have no welded point,  no  active connection point, very suitable as for brick wire mesh. Another hand, brick welded mesh is also a good choose for brickwork. Anping Xinzheng can also produce welded wire mesh, perforated metal mesh, aluminum foil mesh, stainless steel wire mesh, barbecue wire mesh, brass wire mesh, and other metal wire mesh products. 


Material: Steel plate, galvanized plate, stainless steel plate or others


Advantages:
It is expanded metal mesh with continuity of steel.
It has no joints, welds or interweaving to fail under the big stress.
The metal mesh is anchored immovably so that the reinforcement cannot slip under tension.
This is the only type of brickwork reinforcement to give such a unique combination of all these advantages.

 

Laying Instructions:
The mesh should be laid flat and set in the brickwork-joints. The reinforcement must be completely embedded in mortar.
To be assured of its effectiveness, it is normally laid on every third brickwork-joint.
Overlapping must be at least 3 inch.



Photos: